Our Price: £140.00

MXR M 80 BASS DI+ Guitar Pedal Stomp Box

MXR BASS DI+ M-80 GUITAR PEDAL / STOMP BOX

Introducing the Bass DI+ pedal from MXR

Furious, growling bass tone is here! You’ve never seen a stomp box as useful – or necessary – as the new MXR Bass D.I.+! Here’s what it offers – all in one box!

• A gritty, fully controllable DISTORTION channel, to explode your tone!

• A smart NOISE GATE with an adjustable SmartGate™ sensitivity trigger, to remove unwanted hiss and hum, with no sacrifice of tone.

• A COLOUR switch for a quick preset EQ contour that immediately places your bass tone in the “sweet spot” of the mix.

• A BALANCED D.I. for a solid ‘direct to PA’ or ‘direct injection to the board’ signal path!
What else? Switch the BASS D.I. off and you get clean bypass, but the unit’s own Clean channel features the COLOUR switch for some extra
turbocharged tone – and with separate onboard BASS, MID and TREBLE controls for quick tweaks!

And with three power options available – battery, AC power supply or Phantom Power from your mixer, the MXR BASS D.I.+ is certainly a bass stomp box to be reckoned with.


Finally, all the essentials in one tough little box, You need a serious D.I. for playing live and laying down killer tracks.

You've got to have a preamp and finely tuned EQ to add punch to your tones. And you definitely can't do without some rich, custom distortion.

This one-of-a-kind pedal gives you the whole deal in a bomb-proof enclosure that will survive even the most out of control gigs-and players.

Built with the highest quality components, the M-80 can give you eve everything from warmth and transparency to a volcanic roar, without making you scroll through menu screens or an indecipherable manual.

Engage the color switch for some sweet preset EQ, then tweak your tone with three band control. Dial in your ideal distortion with the gain knob and blend just the right amount into your clean signal, then kick it on and off at will. The adjustable noise gate pours on the sustain and cuts out hum and hiss.

With XLR and parallel 1/4" outputs and a phantom power switch, you'll never have a problem delivering your choice new tones.

Power: Single 9-volt battery or Dunlop ECB-003 AC Adapter

Controls: Effect Footswitch toggles Effects on/Bypass (red LED Indicates on)

Distortion Footswitch toggles Distortion channel in/out (Distortion LED indicates Distortion level active)

Bass/Mid/Treb EQ knobs allow Clean and Distortion tone fine-tuning

Color switch activates a pre-set EQ optimized for bass

Clean Volume knob adjusts output level of Clean channel (Effect footswitch on and Distortion footswitch off)

The following knobs are only active when Distortion channel is selected:

Distortion Volume knob adjusts overall output level

Blend knob controls the mix between distorted/clean signal

Gate Trigger knob sets the noise floor threshold, or sensitivity, of the Noise Gate Gate switch selects Noise Gate In/Out

Gain knob sets distortion level Phantom/Ground switch selects between Direct Output Ground Lift (switch up) and Phantom Power (switch depressed)

« Back